SDXI-U2 Serial ASCII Data Exchange Interface
General Description V1.15
© Stemin GmbH
•
SDXI U2 Protocol Description V1.15.doc
•
page
11 of 15
2.4.3 Encoder Rotate Right („U2DM<d>EN<e>RR<CR>“)
Dir
Telegram
Description
U2DM<d>EN<e>RR<CR>
This command executes a rotate right action at
the selected encoder.
<e>: selected encoder
U2DM1EN2RR<CR>
Executes a rotate right action at encoder 2
U2DM<d>EN<e>=<scs>,<ev>,<mut>,
<onl>,<pkl><CR>
returns the settings of the selected encoder:
(see. “Encoder Request Value” command)
U2DM1EN2=1,27,0,0,0<CR>
returns the settings of the encoder 2:
<ev> = 27
U2DM1EN2RL<CR>
Executes a rotate left action at encoder 2
U2DM1EN2=1,26,0,0,0<CR>
returns the settings of the encoder 2:
<ev> = 26
U2DM1EN2RL<CR>
Executes a rotate left action at encoder 2
U2DM1EN2=1,25,0,0,0<CR>
returns the settings of the encoder 2:
<ev> = 25
2.4.4 Encoder Set Value („U2DM<d>EN<e>=<ev><CR>“)
Dir
Telegram
Description
U2DM<d>EN<e>=<ev><CR>
This command sets directly a new value to the
encoder
<e>: selected encoder
<ev>: new encoder value
U2DM1EN2=32<CR>
sets encoder 2 to value of 32:
<ev> = 32
U2DM<d>EN<e>=<scs>,<ev>,<mut>,
<onl>,<pkl><CR>
returns the settings of the selected encoder:
(see. “Encoder Request Value” command)
U2DM1EN2=1,32,0,0,0<CR>
returns the settings of the encoder 2:
<ev> = 32
U2DM1EN7=2<CR>
sets encoder 7 (=system control) to value 2:
<ev> = 2 (Bass)
U2DM1EN1=2,-4,0,0,0<CR>
U2DM1EN2=2,0,0,0,0<CR>
U2DM1EN3=2,0,0,0,0<CR>
U2DM1EN4=2,0,0,0,0<CR>
U2DM1EN5=2,0,0,0,0<CR>
U2DM1EN6=2,0,0,0,0<CR>
U2DM1EN7=2,2,0,0,0<CR>
U2DM1EN8=2,0,0,0,0<CR>
returns the bass settings of all encoder/channels:
