INSSTE302P0514
13
• By pressing down the button.
• By not pressing down any buttons during 1 minute.
In any case, the adjustment is saved.
Frost-free warning
The icon is displayed when the temperature set point is between 3°C (37°F) and 5°C (41°F). A
minimum temperature will be maintained to ensure frost control.
security mode
It is possible to impose minimum and maximum temperature set points by activating this mode. Then, it
becomes impossible to exceed the maximum set point and go below the minimum set point, regardless
of the current mode. When the Security mode is activated, any change in operation mode (Manual,
Automatic or Preprogrammed) or any change in programming (Automatic mode) or preprogramming
(Preprogrammed mode) is impossible.
Procedures to activate the Security mode
To activate the Security mode, you must be in the desired mode (Manual, Automatic or Preprogrammed),
and you must have completed the programming (Automatic mode) or selected the desired
preprogramming (Preprogrammed more).
1. In any mode (Manual, Automatic or Preprogrammed), out of any adjustment mode, press down the
button for 3 seconds and release it. The various icons and options appear and °C or °F icon
flashes.
2. Press down the or button to select the icon (indicated by its flashing). Press down the
button to confirm your choice.
3. All icons disappear except the icon that continues to flash. Press down the or button to
activate the Security mode (indicated by the icon that turns on). Press down the
button to
confirm your choice.
4. L_ _ _ is displayed instead of the hours and the adjustment of the minimum set point flashes. Press
down the or button to adjust the minimum set point temperature. The adjustment can range from
--.- (Heating off) to 30°C by intervals of 0.5°C (or 86°F by intervals of 1°F). Press down the
button to confirm your selection.
5.
H
_ _ _
is displayed instead of the hours and the adjustment of the maximum set point flashes. Press
down the or button to adjust the maximum set point temperature. The adjustment will be
between the minimum set point previously selected and 30°C by intervals of 0.5°C (or 86°F by intervals
