INSSTE2411014
7
intial start up
When powering on for the first time, the thermostat is initially set to Day mode
. The temperature is displayed in Celsius and is set at 21 degrees by default.
temperature set points
The figures displayed above the pictogram indicate the temperature set point. It can
be displayed in degrees Celsius or Fahrenheit (see “Display in degrees Celsius/
Fahrenheit”).
To adjust the set point, just press down the top button to increase the value, or the
bottom button to decrease it. Set points can be adjusted by increments of 0.5°C
(1°F). To quickly scroll through the set point values, press and hold down the button.
The minimum set point is 3°C (37°F), and the maximum set point is 30°C (86°F). In
Day mode, you can turn off the thermostat by lowering the set point below 3°C. The
set point value displayed will be --.-, and heating system start up will be impossible.
oPeration
Ambient
temperature
timer
Heating
power
used
indicator
Security mode
Single
programming
mode
Top button
Pictograms
Frost-free
warning
Night mode
Day mode
Bottom button
