1. Remove base and pole components
from packaging.
2. Pull 2-pin power connector from inside pole.
3. Insert pins into female connector located in
base and secure the connection by tighten-
ing the rotating collar.
4. After securing the 2-pin connection, push the
excess cord back inside the pole and begin
attaching the pole to the base of the lamp.
To do so, insert pole into base and
turn clockwise.
5. Once the pole is securely attached to the base of the
lamp, assembly is complete.
6. To begin using the lamp, simply
remove power adapter from its
box and plug into the back-side
of the base. Plug adapter into
an outlet.
7. Remove remote control from packaging
and pull the plastic tab to activate battery.
8. Store remote by placing it anywhere on the small pole of the
lamp. Magnets inside the remote allow for placement
anywhere on the smaller metal pole.
9. To adjust the height of the lamp, simply loosen
rotating collar on the lamp pole, and adjust as
needed. Once you have reached the desired
height, tighten rotating collar to prevent the pole
from moving.
M
Assembly Instructions
