email: [email protected]
3
MK-45 RGB fibre optic light engine
User manual
Connection method between optical fibres and the light engine
Your fibre optic bundle will come with the
connector fittings ready to connect to the
light engine. However, if you need to adjust
your bun
follow the steps below.
1.
Align all the optical fibre ends and fasten with tapes which can resist temperature over 130
℃
2.
Pass the fibres through the connector and fasten the rotary tensioner until the fibres are tightened.
3.
Cut the fibre bundle to a flat surface with a heat-knife or blade.
4.
Make sure that the optical fibre bundle head is smooth and clean to ensure even light distribution.
5.
he
. Fasten the bundle with
the screw on the top of the
.
