stellar labs Slider20, Owner'S Manual

Page: 17 / 44

11 Specifications 11
Chapter 4 - Specifications
• Will accommodate bodies from 13-feet
up to 18-feet long and still attain the
maximum rated dump angle on a 41-
inch high frame truck. Longer bodies
may be accommodated with reduced
dumping capabilities.
• Transmission-mounted PTO and
hydraulic pump required to power the
Hooklift loader.
• Standard in-cab manual controls which
allow for precise metering of the manu-
al hydraulic valve. Solenoid-activated
hydraulic control valve with electric
remote control pendant is optional.
• Ten (10) gallon frame-mounted oil tank.
• Operating pressure is 4,200 psi.
• Hydraulic flow required is 15-gallons per
minute.
A
B
C
D
E
G
H
I
J
K
L
Lifting Capacity
Dumping Capacity
Dump Angle
Lowest Hook Height
Effective Length
Truck Frame Height
Hooklift Height
Hooklift Length
Hooklift Center of Gravity
Chassis Cab to Axle
Max. Height When Loading
Longest Body When Dumping
Max. Height When Dumping
Maximum Operating Pressure
Shipping Weight
Shipping Dimensions (LxWxH)
Min. Truck GVWR
Load Angle w/ Shortest Body Length
Recommended Container Lengths
20,000lbs.
(9,072kg)
20,000lbs.
(9,072kg)
55°
47”
(1,194mm)
143” to 185”
(3,632mm to 4,699mm)
41”
(1,041mm)
51.63”
(1,311mm)
195”
(4,953mm)
87”
(2,210mm)
138” (
3,505mm) minimum
156”
(3,962mm) maximum
159”
(4,039mm)
20’
(6,096mm)
241”
(6,121mm)
4,200psi
(29 Mpa)
3,500lbs.
(1,588kg)
195”x53”x75”
(4,953mm x 1,346mm x 1,905mm)
25,000lbs.
(11,340kg)
47°
13’ to 18’
(3,962mm to 5,486mm)
• Patented dump/load interface as fea-
tured on most Stellar Shuttle Hooklift
loaders.
• Hydraulic locks to prevent cylinder col-
lapse in case of hose failure.
• Hook latch to prevent body from
becoming detached prematurely.
• Slide through rear body tie-down latch-
es.
• Proximity switch to prevent front jib
movement when the dump frame is
raised.
• Permanently lubricated bushings used
throughout.
• Stainless steel pins used throughout.
• All weldments painted with DuPont®
Imron® 5000.