![STEINWAY LYNGDORF Steinway & Sons LS Installation Manual Download Page 14](http://html.mh-extra.com/html/steinway-lyngdorf/steinway-and-sons-ls/steinway-and-sons-ls_installation-manual_1371480014.webp)
Steinway & Sons Model LS – Installation Manual, version 2.1
14
Mount the Remaining Side Brackets
Model LS boundary woofers, right, left, center, and surround loudspeakers: When cable connections are
complete, use a TORX 30 screwdriver to mount the remaining side brackets on the rear of the loudspeaker
stacks, bridging the individual loudspeakers as shown previously. The brackets on the rear of the loudspeaker
stacks will partially cover the socket panels, so make sure connections are complete before mounting the
remaining brackets on the rear of the stack.
Mount the Wall Bracket in the Wall
Model LS right, left, center, and surround loudspeakers: Mount the wall bracket on the bottom side of the
horizontal stud at the top of the wall cutout as shown, fixing the bracket to the stud with five screws. Note that
the purpose of the wall bracket is to stabilize the stack and not to bear its weight; the stack stands on four
spikes attached to the bottom bracket, and these spikes are placed in their respective holes in the spike sheet,
which protects the floor.
NOTE! Never use countersunk screws when mounting the loudspeaker units.
There are no top brackets for the LS boundary woofers.