Steinway & Sons Model LS – Installation Manual, version 2.1
13
Mount the Brackets for the Top and Bottom Loudspeakers in a Stack
Model LS right, left, center, and surround loudspeakers: Using the same TORX 30 screwdriver and the screws
you have just removed from the side and rear brackets, secure the dedicated top and bottom brackets to the
loudspeakers in their respective stacks as shown to the right. The top and bottom brackets for the Model LS
center loudspeaker are identical to the top and bottom brackets for the Model LS surround loudspeakers.
Model LS boundary woofers: There are no top or bottom brackets for the LS boundary woofers. For the
bottom unit in a stack, attach spikes or rubber feet, depending on the floor surface. For middle and top units in
a stack, attach rubber feet to each unit to stabilize the stack, as the rubber feet fit precisely into corresponding
recessions in the boundary woofers beneath.
