STEINWAY LYNGDORF M, Installation Manual

Page: 6 / 21

INSTALLATION
Mounting Spikes
After locating the optimal positioning of the boundary woofers, you might consider using the supplied
Spike Kit to give the speakers optimal support. From the Spike Kit you have the choice of the
following designs:
•
28mm Spikes for wooden floors or carpets with low tufts
•
48mm Spikes for carpets with big tufts
•
Non-penetrating rubber faced feet for stone floors.
To mount the spikes to the Model M boundary woofers, we recommend that you gently lay the
speaker on its back on a thick towel or soft blanket.
After mounting the selected spikes, gently bring the speaker to its upright position in the selected
place. Then adjust the spikes to give optimal support.
When mounted with spikes, the Model M boundary woofer should not be dragged or pushed into
position.
(*) Spikes are the most stable solution for positioning the speakers, but they might damage the floor.
Make sure that the customer understands the implications from choosing spike mounting.
(**) Please note that the rubber-faced feet can leave black marks if the speaker is pushed or dragged.