16
ROCK.AIR.COOL
Removing the cooler:
• Push the unit back (into the body) to allow access to
the screws.
• Undo 7 screws each on the left and right-hand sides
of the frame.
• Remove the frame.
• Carefully pull the unit out and lift it towards the front
(ideally with 2 people).
Installing the cooler:
• When installing the cooler, open the inspection flap
and carefully pull on the hoses to prevent them from
becoming kinked.
• When installing the frame, make sure that the pins for
the side frame panel are in the correct holes. Once
you have done this, insert and tighten the screws.
(Caution: The screws have several different lengths.)
• Carefully pull the unit out and lift it towards the front
(min. 2 people).
