steinert UME 115 130 C Instructions Manual Download

Page: 54 / 86

Over-belt magnetic separator UME … C

Maintenance

GB_UME 75-135 ... C-03-US

10.5 Lubrication

NOTE!

Lubricants!

Environmental damage.

Have disposal carried out by authorized
specialist companies.

If substances that are harmful to the
environment are released:

Remove contamination.

Inform the responsible local authority.

H_SSF_01_EN-US-00

NOTE!

Mixing of different grease!

Material damage.

Avoid mixing of different grease types.

H_F_01_EN-US-00

Storage of lubricants

Lubricants such as oil and grease:

store in clean and closed containers.

protect from dust and moisture.

store in a cool and dry place.

10.5.1 Lubricating the roller bearings

The factory-fitted maintenance-free bearing units are lubricated with
corrosion and aging-resistant roller bearing grease.

Designation

Unit

Grease nipple size

R1/8; DIN 71412 - B

Lubricating points tension
bearings

2 pcs

Lubricating points flange
bearings

2 pcs

First filling

The first filling is performed in the factory using

Shell Gadus S2 V220 2

DIN 51502,

The temperature range of the grease is -20 °C to +130 °C.

Summary of Contents for UME 115 130 C























































































Search results

Summary of Contents for UME 115 130 C

Reviews:

Related manuals for UME 115 130 C

Brands by name

Popular brands

steinert UME 115 130 C, Instructions Manual

Search results

Summary of Contents for UME 115 130 C

Reviews:

Related manuals for UME 115 130 C

Brands by name

Popular brands