13
TERRA
RAKE
MAINTENANCE / STORAGE
MAINTENANCE
DAILY INSPECTION AND MAINTENANCE
• Visual inspection for loose, missing or worn
components and replace if needed.
• Inspect for bent rake tines and replace as
needed.
• Check tire pressure.
• Inspect and grease pivot ball and caster
bushings as needed.
•
Inspect hydraulic hoses and fittings for leaks,
deterioration, or damage.
• Inspect and lightly lube top link as needed.
ANNUAL INSPECTION AND MAINTENANCE
• Visual inspection for loose, missing or worn
components and replace if needed.
• Inspect for bent rake tines and replace as
needed.
• Check tire pressure.
• Inspect and grease pivot ball and caster
bushings as needed.
• Inspect and lubricate rod ends on top link.
• Inspect and lubricate rod ends on hydraulic
cylinder.
• Inspect caster wheel axles and bearings.
•
Inspect hydraulic hoses and fittings for leaks,
deterioration, or damage.
TIRE PRESSURE
Tire pressure should be maintained at 40 psi.
WARNING
LUBRICATION LOCATIONS
3 points-Centerlink and wheel casters
RAKE TINE REPLACEMENT
1. Park power unit on level surface and set the
parking brake.
2. Lower kickstand and lower rake to the ground.
Shut off the tractor.
3. Adjust top link so tines are off the ground.
4. Remove bolt
X
and nut
Y
. Slide out old tine.
5. Insert new rake tine and attach to rake with bolt
X
and nut
Y
.
X
Y
Z
STORAGE
PLACING RAKE IN STORAGE
1. Clean the rake.
2. Inspect for loose or missing hardware, damaged
or worn parts. Repair or replace any damaged or
worn parts.
3. Apply grease to grease points. Wipe off excess
grease. Inspect and lightly lube top link as
needed.
REMOVING RAKE FROM STORAGE
1. Clean and inspect rake for use.