Steiner M1050r LRF, Instruction Manual

Page: 5 / 12

5
6
INSERTING AND REPLACING THE BATTERY
INSERTING AND REPLACING THE BATTERY
The laser range fi nder is powered by a type 3 volt CR 123A
lithium battery.
1. To insert and replace the battery, unscrew the battery
cover
6
by turning counterclockwise.
2. Insert the battery with the positive end forward
(according to the symbol in the battery compartment).
3. Screw the battery cover back on by turning clockwise.
BATTERY CHARGE LEVEL
A new battery is suffi cient for more than 5,000 measurements
at 20°C. Depending on the conditions of use, the battery life
time can be signifi cantly shorter or longer than this. Low tem-
peratures and frequent use of the scan mode shortens the
battery life. A fl at battery is indicated by a fl ashing measured
value and target display.
Warning:
Cold conditions impair the battery performance. At
low temperatures, the LRF should therefore be carried close to
the body and used with a fresh battery.