STEINEL professional XLED PRO 240, Manual, Page: 19 / 142

– 19 –
11. Troubleshooting
Malfunction Cause Remedy
LED floodlight without power
■
Fuse has blown,
not switched ON, break in wiring
■
Short circuit
■
New fuse, turn on power switch,
check wiring with voltage tester
■
Check connections
Sensor-switched LED
floodlight will not switch ON
■
Twilight setting in night-time mode
during daytime operation
■
Mains switch OFF
■
Fuse blown
■
Detection zone not correctly
adjusted
■
Reset
■
Switch ON
■
Replace fuse, check connection
if necessary
■
Readjust
Sensor-switched LED
floodlight will not switch OFF
■
Continued movement within the
detection zone
■
Check zone and readjust if
necessary or apply shroud
Sensor-switched LED
floodlight keeps switching
ON and OFF
■
Animals moving in detection zone
■
Tilt sensor higher or fit shrouds to
target sensor; adjust detection
zone or fit shrouds
Sensor-switched LED
floodlight switches ON when
it should not
■
Wind is moving trees and bushes in
the detection zone
■
Cars in the street are detected
■
Sudden temperature changes due
to weather (wind, rain, snow) or air
expelled from fans, open windows
■
Sensor-switched LED floodlight
swaying (moving), resulting, for
example, from gusts of wind or
heavy precipitation
■
Change detection zone
■
Change detection zone
■
Adjust detection zone or install
in a different place
■
Fit sensor-switched LED floodlight
to a firm surface
GB