- 20 -
Setting Hallway detection
Reach can be set separately for both
directions via Smart Remote app The
Steinel logo on the sensor indicates the
direction.
a
The reach shown by "S" points to the
direction in which the S in the Steinel
logo points.
b
The reach shown by "L" points to the
direction in which the L in the Steinel
logo points.
• Setting reach via:
–
Smart Remote app
Bluetooth grouping
The sensors can be operated a individual
sensor or as a group. The group is inter-
connected via wireless communication.
In each group, a group master must be
defined in the Smart Remote app. All
sensors in a group operate in the same
way as the group master is configured.
Reach can be set individually for all lights
in the lighting group.
The COM1 and COM2 versions
additionally provide the following
functions:
Twilight setting
The chosen response threshold can be
set from approx. 2 to 2000 lux.
Daytime operation
When movement is detected, the sensor
switches the load ON irrespective of
ambient brightness.
Teach-IN
The Teach-IN function is to be selected
at the level of light at which you want the
sensor to respond to movement from
now on. The level of ambient brightness
measured in this way will be saved after
10 seconds. The load is deactivated
during this period.
Time setting
The chosen stay-ON time can be set
from a minimum of 30 seconds (True
Presence) / 10 seconds (Hallway) up to
a maximum of 60 minutes. When the
response threshold is exceeded, the
sensor switches OFF after the stay-ON
time expires.
Neighbouring-light function
The neighbouring-light function can be
activated and deactivated via the Smart
Remote app. This function assigns the
neighbouring groups to the active sensor
group. The active group responds to
activation signals from the neighbouring
group assigned to it and switches to
main light as defined in the settings.
Operating mode
Semi-automatic mode
The light now only switches OFF auto-
matically. Light is switched ON manually.
Light must be requested using the button
and stays ON for the time set.
Fully automatic mode
The light automatically switches ON and
OFF in relation to light level when some-
one is present. Light can be switched ON
and OFF manually at any time.
This temporarily interrupts the automatic
switching function.
Presentation mode
If input
S
is used in fully automatic mode
with load activated, the sensor will activate
presentation mode. The load remains
switched OFF as long as movement is
being detected. As soon as movement is
no longer being detected and the stay-ON
time has elapsed, the sensor returns to
normal sensor mode.
