STEINEL Control Pro DT Quattro DCS, Manual

Page: 47 / 63

- 47 -
11. Troubleshooting
Malfunction Cause Remedy
Sensor not detecting
motion
■
Sensor is not wired
properly to the Data Line
of the Controller
■
In the DCS App check
if the bus connection is
working properly over
the LED blinking func-
tion available on the
sensor settings page
Sensor is wired up
properly but still not
reacting to motion
■
Additional sensor set-
tings in the DCS App
need to be checked and
corrected
■
Check complete assign-
ment of the sensor func-
tionalites for the itended
lighting zones in the App
configuration. Make sure
the sensor is assigned
to the proper zone and
the desired sequence of
operation is selected
Sensor sending
motion detection
signal when it should
not
■
There is interference,
e.g. fan, air conditioning
system or other source
of heat, in the detec-
tion zone
■
Sensor near Wi-Fi or
other wireless communi-
cation source
■
Relocate the sensor
■
Install at least 6 ft away
from the wireless com-
munication source