8
STEINDORFF
®
2.2.8
Installing and replacing the lamp (Fig. 14-17)
Please use the specified halogen Lamp 6V30W.
1.
Pull out the lamp-house
①
as the picture show (Fig. 14)
2.
Hold to the bulb
①
after you wrap it with gauze or other
protection materials, then depress the plugs into the jack
on the lamp house, ensure the filament and the bolt
are in a same level. (Fig. 15)
3.
Replacing the lamp when using or soon after
When using, or soon after it is turned off, the lamp, the
lamp house and nearby parts will be very hot and will
cause serious burns. Please turn the main switch on “O”
(off), pull up power plug, and make sure the bulb, the
lamp house and periphery are all cool. Then, you can do
your replacing.
Please insert the lamp gently, or it will be damaged
by excessive extrusion.
Do not touch the Halogen bulb with your hands. It will
shorten the service life or cause it to burst. If you leave
fingerprints on the surface carelessly, clean it with a dry
soft cloth.
4.
Align the socket
①
and pins
②
and align the bolt
③
and
the jack
④
. Then push the lamp-house into the
Metallurgical Illumination Set until covered. (Fig. 15-16)
Fig. 14
Fig. 15
Fig. 16
Fig. 17