– 50 –
Remote Controlling the DSP Factory Mixer
It is possible to use a Yamaha 01V digital mixer to remote control the
DSP Factory mixer in Nuendo.
Setting Up
❐
Make sure to read the chapter about Remote Control in the Operation
Manual as well, for general information about remote control in Nuendo.
1.
Connect the 01V to your MIDI Interface.
The mixer should be connected “both ways” to allow feedback to indicators and mo-
torized faders.
2.
Make the following settings on the 01V (see the 01V manual for
details):
•
Enable MIDI Parameter Change Receive and Transmit.
•
Disable MIDI Control Change Receive and Transmit.
•
Set Device ID / MIDI Channel Receive to “1”.
•
Local Control on the 01V should be set to “Off”.
This ensures that you don’t change the internal settings on the 01V instead of the DSP
Factory parameters.
3.
In Nuendo, pull down the Devices menu and select Device Setup.
4.
Select “Yamaha 01V”.
5.
Pull down the Input pop-up menu and select the MIDI Input to which
the 01V is connected.
6.
Pull down the Output pop-up menu and select the MIDI Output that is
connected to the 01V.
7.
Click OK to close the dialog.
You are now ready to use 01V as a remote control unit.
Summary of Contents for NUENDO 2
Page 1: ...Using Nuendo with DSP Factory...
Page 53: ...53 Index...
