– 11 –
Physical Inputs and Outputs
By default, the physical inputs and outputs of the DSP Factory system
are connected to the DS channels in the following way:
Inputs
Outputs
“IOA” and “IOB” are the connections to additional input/output units
such as the AX44. For each DS2416 card, you can add two extra in-
put/output units (IOA and IOB). Each unit may have 4 or 8 inputs and
outputs.
❐
As you see, the default routing only provides access to four extra out-
puts (for use with external effects, etc). To be able to use all additional
inputs and outputs, you will need to re-configure the input and output
routing. This is described on
page 34
.
Physical Input
DS Channel
DS2416 Analog In Left
17
DS2416 Analog In Right
18
DS2416 Digital In Left
19
DS2416 Digital In Right
20
Bus/Send in the
DSP Factory Input Console
Physical Output
Master Stereo Out Left/Right
DS2416 Analog Out Left/Right
and
DS2416 Digital Out Left/Right
Aux Send 1
IOA/IOB Output 1
Aux Send 2
IOA/IOB Output 2
Aux Send 3
IOA/IOB Output 3
Aux Send 4
IOA/IOB Output 4
Summary of Contents for NUENDO 2
Page 1: ...Using Nuendo with DSP Factory...
Page 53: ...53 Index...
