2 - switch
3 - volume control
4 - accuracy controller
3.2.
Preparing for use
APPLIANCE LOCATION
The device should always be used when positioned on an even, stable, clean,
fireproof and dry surface, and be out of the reach of children and persons with
limited mental and sensory functions.
The device can also be hung on the wall.
Before use, install the batteries according to the indicated polarity.
3.3.
Device use
Turning on/off
1. Press the power button to turn on the device. The device will automatically
enter the auto levelling mode.
2. The same power button is also used to turn the device off.
PLEASE NOTE:
The device will turn off automatically after 5 minutes in the alarm
state (it means that the permissible tilt angle has been exceeded which is signalled
by a flashing icon on the control panel).
Battery level indicator
1. Connect to charge or replace the batteries when the power indicator is on.
Levelling
1. When the device is turned on, it automatically enters the levelling mode. The
laser beam will start blinking.
2. After levelling is completed, the laser will start rotating at 600 RPM.