Steinberg Systems SBS-PF-300/50, User Manual

Page: 6 / 19

7. C key: It is used for canceling the set up unit price.
8. . key: DECIMAL POINT key is used for set the decimal position of unit price.
9.
M*(*=1,2, etc) key: it’s for withdrawing the unit price that stored. when put ob -
ject on platform, and press one key of them, the unit price and relevant total pri-
ce will be displayed on screen.
10. STORE key: to save the unit price by M*. press STORE firstly, the unit price will
show you “o”, then you can input the digits that you wanted, and press M*(*=1,2,
etc.), after that, the price has been stored.
MAINTENANCE
1. Battery
The battery must be recharged properly after use of the scale when unit price
window show “-Lb-“. Normally charge for 1.2hours for each use of 1 hours of
scale. If it is not used for long time, please charge it continuously at least for
24hours after 3months,otherwise it will cause damage to battery.
2. Common Trouble Shooting
10
EN
11
Trouble Instruction Mögliche Ursache Problemlösung
AC lamp is not
glowing Power may not be
connected • The mains
plug may be
disconnected.
• The power
cable is dama-
ged.
• Insert the power
plug or replace it
if damaged.
• Change the pow-
er cable.
Scale is not
turning on with
battery There is no DC
power supply to
the Scale • The storage
battery is
damaged
• The battery
connection are
not proper
• Ensure the con-
nections are in
good condition.
• Repair by quali-
fied technician.
Over voltage
LED glows,
Alarms and auto-
matically turn off Over Voltage Battery is in use
for too long time • Charge the
battery
• Or repair by qua-
lified person
Weight reading is
unstable Over voltage
or affected by
moisture Insufficient voltage
OR use of battery
is prolonged even
after the warning
alarm OR too
much humidity in
surrounding.
• Tested or
repaired by quali-
fied technician.
Following chart will show you the common trouble shooting.
EN