STEIN300_Hubzentriereinrichtung_HZEV_03_GB.DOC / 02.2020
27
11
Appendix
11.1
Technical data
Lift
•
Max. 350 mm
•
WT = max. 337 mm above the drive belt
Sizes available
Any size with a side length between 160 to 400 mm, square or rectangular.
Available cylinder strokes
100, 125, 160, 200, 250, 350
Dimensions
•
Height: Cylinder 260 mm
•
Length and width: 160 to 400 mm
Weight
6 kg (160x160 mm) – 18 kg (400x400 mm)
Total permissible weight
Workpiece, workpiece holder and workpiece carrier: 12 kg
Workpiece carrier positioning
accuracy
•
+/- 0.02 mm in its X and Y axes
•
+/- 0.1 mm in its Z axis (if load is centred)
Permissible WT loading
•
in the X axis: 0 N (load only
with customer-side support)
•
in the Y axis: 0 N (load only
with customer-side support)
•
in the Z axis:
400 N with centred load
(STEIN operating pressure 4
bar)
From 100 N you must support
the belt element with a stand
or base plate!
•
M: 10 Nm if load is not cen-
tred
Control
•
Automatic interface signal or via hand or foot operated buttons
•
Inductive proximity switch: standard from the automatic station
Compressed air supply
•
PUN 6x1, manufactured by Festo
•
Max. 6 bar
