“THEBEN” Time Clock Setting Instructions Continued
Page 2 of 4
Document #1200608 Rev 3
02/25/2015
11. To set whether or not daylight savings time (DST) is used, press "
►
" button until "SUM/WIN" is displayed. Press
"OK".
a.
With Daylight Savings Time
Use the "
►
" button until "SU-WI USA" is displayed. Press "OK".
b.
Without Daylight Savings Time
Press the "
►
" button until "NO SU/WI" is displayed. Press "OK".
12. The clock will return to the time/status display and the day of the week should automatically be indicated by
number (1 = Monday...7 = Sunday) at the bottom.
SETTING
THE
CHARGE
(ON)
AND
CONTROL
(OFF)
CYCLES
NOTE: Start times for each charge (on) and control (off) cycle MUST be set. To ensure proper operation, the
first program setting should be charge (on). If the first cycle would normally be control (off), set a 12:00
a.m. charge (on) time as part of your schedule.
1. Press the “MENU” button until "Program" is displayed in the upper portion of the display. Press "OK".
2. Use the "
◄
" or "
►
" button until "NEW" is displayed. Press "OK". "MEM FREE" and a number will automatically
appear after a few seconds to indicate how many program locations are available. There are a total of 56 program
locations available if no program settings have been entered.
3. The clock will automatically display "ON" or "OFF" toward the top of the display. "On" or "Off" will be flashing. Use
the "
◄
" or "
►
" button until “ON” displays and press “OK” to set the charging period.
NOTE: “ON” is a charging cycle and “OFF” is a control cycle.
4. "HOUR" will be displayed across the top. Use the "
◄
" or "
►
" button to adjust the hour. Press "OK".
5. "MINUTE" will be displayed across the top. Use the "
◄
" or "
►
" button to adjust the minutes. Press "OK".
6. "MONDAY" will display. Select the days of the week that this particular program setting pertains to by using the "
◄
"
or "
►
" button until the first day of the cycle is flashing. Press "OK" and "COPY" will flash. Press "OK" and "ADD
TUESDAY" will appear. Continue to press "OK" to select the desired days. To bypass a day, press "
►
". After "ADD
SUNDAY" is displayed and/or selected, "SAVE" flashes on the display. Press "OK". "NEW" will display.
NOTE: Bypassing a day keeps the time clock in the last state it was in prior to the bypassed day.
7. Press “OK” Repeat Steps 3-6 to program “TIME OFF” (control cycle).
8. Press “OK” to enter another program cycle or press “MENU” until you reach the standard display.
VIEWING THE CHARGE (ON) AND CONTROL (OFF) CYCLES
1. To view the program settings, press the "MENU" until "Program" is displayed. Press "OK". "NEW" will be displayed.
Press the "
◄
" or the "
►
" button until "CHECK" is displayed.
2. Continue to press and release "OK" button to review the programs or press “MENU” until you reach the standard
display.
CLEARING A SINGLE CHARGE (ON)/CONTROL (OFF) CYCLE
1. To clear individual program settings, press the "Menu" until "Program" is displayed. Press "OK". "NEW" will be
displayed. Press the "
◄
" or the "
►
" button until "DELETE" is displayed. Press "OK".
2. "SINGLE" will display. Press "OK" and use the "
◄
" or the "
►
" button until the day of the week desired is displayed.
Press "OK".
3. Use the "
◄
" or the "
►
" button to select "DELETE" if clearing the current program setting. Press "OK" and the current
program setting will be cleared
