14
Longitude (only available with GPS receiver connected)
This variant shows the longitude measured by the GPS receiver. The aim is to enable the user to
follow a constant longitude.
Latitude (only available with GPS receiver connected)
The same as before, except that latitude is shown.
5.5 SOUND (Beeper Configuration)
This menu can be used to set the beeper volume and to determine if a beep is played after each
measurement:
The following settings are available:
OFF
The beeper is completely switched off (not recommended). No sounds
(even no alarms) will be played.
MIN
Low volume sounds will be played after each key press and in case of
an alarm (see 5.6).
MIN/MEAS
As above, but with additional beep after each measurement.
MED
Same as MIN but with medium volume.
MED/MEAS
Same as MIN/MEAS but with medium volume.
MAX
Same as MIN but with maximum volume.
MAX/MEAS
Same as MIN/MEAS but with maximum volume.
5.6 ALARM (Alarm Thresholds)
This menu enables to configure the acoustic alarms. An alarm tone will be played each time a
configured limit is exceeded.
The following settings are available:
OFF
Alarm feature disabled.
SOUND
MAX/MEAS
ALARM
OFF
GPS LON
< - + >
GPS LAT
< - + >
