15
14
S-Charge User Guide
1. If there is a fault detected during charging, the
display will show as follows:
2. If this occurs, disconnect and reconnect the
charger.
3. If the problem persists, disconnect for 30
minutes and try again.
4. If the issue has not been resolved, contact
your prosthetic provider.
• It is important to inspect your S-Charge
System regularly to ensure early detection
of any potential problems.
• The S-Charge System has been designed
to require minimum maintenance,
therefore if the device is not functioning
as you believe it should, please contact
your prosthetic provider for guidance.
• The display can be gently wiped clean
using a soft cloth only. The use of solvents
or abrasives may damage the screen, thus
affecting the visibility of the text.
• If used with a glove, please ensure that
water does not run down the inside of the
glove at any time.
Warning:
To ensure that the S-Charge System
does not become damaged, do not directly press
the display whilst switching the S-Charge System
in/out of Standby Mode.
Charging Fault
Care and Cleaning
