11
GENERAL SAFETY INSTRUCTIONS
WARNING!
When using electric tools, basic safety precautions should always be followed to
reduce the risk of fire, electric shock and personal injury, including the following. Read all these
instructions and the signs on the tool before operating this product and save these instructions.
For safe operations:
1. Keep work area clean. Cluttered areas and benches invite injuries.
2. Consider work area environment. Do not expose power tools to rain. Do not use power tools in
damp or wet locations. Do not use power tools in the presence of flammable liquids or gases.
Keep work area well lit.
3. Guard against electric shock. Avoid body contact with earthed or grounded surfaces. (e.g. pipes,
radiators, ranges, refrigerators).
4. Keep other persons, especially children, away. Do not let persons not involved in the work touch
the tool or extension cord and keep them away from work area.
5. Store idle tools. When not in use, tools should be stored in a dry, high or locked up place, out of
reach of children.
6. Do not force the tool. It will do the job better and safer at the rate for which it was intended.
Only grinding operations for which the abrasive product is suitable shall be carried out
7. Use the right tool. Do not force small tools or attachments to do the job of a heavy-duty tool.
Do not use tools for purposes not intended.
8. Dress properly. Do not wear loose clothing or jewellery; they can be caught in moving parts.
Non-skid footwear is recommended when working outdoors. Wear protecting hair covering to
contain long hair.
9. Use safety glasses and ear protection at all times. Also use face or dust mask if the cutting
operation is dusty. Ordinary eye glasses are not safety glasses.
10. Ensure that sparks resulting from the use of the tool do not create a hazard (e.g., do not hit
persons or ignite flammable substances).
11. Connect dust extraction equipment. If the tool is provided for the connection of dust extraction
and collection facilities ensure these are connected and properly used. Vacuum cleaners can be
used if suitable for the material being extracted. Check your vacuum cleaner’s manual for
instructions.
12. Ensure that ventilation openings are kept clear while working in dusty conditions. If it is
necessary to clear the dust, first disconnect the tool from the main supply (use non-metallic
objects) and avoid damaging internal parts.
13. Do not abuse the cord. Never yank the cord to disconnect it from the socket. Keep the cord
away from heat, oil and sharp edges.
14. Secure work. Where possible use clamps or a vice to hold the work. It is safer than using your
hand and it frees both hands to operate the tool. Check that the work piece is properly
supported.
15. Do not overreach. Keep proper footing and balance at all times.
16. Maintain tools with care. Keep cutting tools sharp and clean for better and safer performance.
Follow instructions for lubrication and changing accessories. Inspect tool cords periodically and
if damaged, have it repaired by authorized service centre. Inspect extension cords periodically
and replace, if damaged. Keep handles dry, clean, and free from oil and grease.
17. Always disconnect the tool from the power supply when not in use, before servicing, and when
changing accessories.
18. Remove adjusting keys and wrenches. Form the habit of checking to see that keys and adjusting
wrenches are removed from the tool before turning it on.
19. Avoid unintentional starting. Do not carry a plugged-in tool with a finger on the switch. Ensure
switch is off when plugging in.