Macros (Software)
The SteelSeries Ikari Laser features macros that can be assigned to any of the
5 programmable buttons. The macros can consist of keyboard presses and/or
mouseclicks. To assign a macro to a button, choose “Macro” in the dropdown
menu for the desired button - Note that the macro “Rec” and “Edit” buttons
are now made active. To record a macro click the “Rec” button, and use the
keyboard to type and the mouse to click, until you have your desired macro
sequence. NOTE: The maximum length for each macro sequence, is 5 actions.
When you are done, click the “Stop” button. The macro field will now display
the recorded macro, so you can easily verify that the macro is correct.
A macro could look like this; “CTRL[dn]{0}A[dn]{0}A[up]{0}CTRL[up]{0}B[dn]{0}
B[up]”. This macro sequence does the following; ‘CTRL’ gets pressed, then
after a pause of 0 msec (immediately after) ‘A’ gets pressed and immediately
after ‘A’ gets released again. Then ‘CTRL’ gets released released and finally ‘B’
gets pressed and released again immediately after.
Menu (Software)
The SteelSeries Ikari Laser features 5 programmable buttons. As with all
settings in the SteelSeries Ikari Laser, the button settings made in the
SteelSeries Ikari Laser Software gets stored on your mouse, so your settings
remain no matter where you plug in your mouse. All buttons can function as
regular mousebuttons or activate macros. To set the function for a button,
simply select a function from the dropdown menu for each button.
SteelSeries_Ikari_Laser_-_20071019.indd 8-9
11-02-14 9:03 AM
