SM-BM-16
SM-BM-
16 Operator’s Manual
17
Part number:
ZBD-0509-12-00-00-0
(includes 5 mm hex wrench)
4.2. Anti-scratch guide sticker
Self-adhesive guide sticker prevents scratches of the aluminum workpieces. After
you remove the sticker, clean excess glue from the guide with petroleum ether.
4.3. Worktable fixture
Designed to bevel workpieces with cross section of at least 15×25 mm (0.6×1
″) and
length of at least 400 mm (16
″). The width of the workpiece can be up to 100 mm
(4
″), and height up to 65 mm (2.5″). The maximum bevel width is 14 mm (0.55″).
Install the worktable fixture by using holes in the base (
1
). Then, remove the levers
and remove the vertical clamp (
2
). Unplug the machine from the power source, and
rotate the sleeve to set ‘0’ on the scale. Next, put the machine with a beveling milling
head into the worktable fixture (
3
) so that the motor is on the support (
4
).
Part number:
NKL-0509-05-00-00-0
