SM-BM-16
SM-BM-
16 Operator’s Manual
16
Rotate the sleeve to set ‘0’ on the scale (
1
). Use the 6 mm hex wrench to loosen the
rollers (
2
) and move them away from each other as far as possible. Put the pipe
vertically and put the machine onto the pipe. Press the roller (
3
) to the pipe and move
the rollers (
4
) equally to the pipe. Tighten the rollers in this position. Next, move the
machine from the pipe and set the required parameters (
5
). Then, start the machine,
slowly move it to the pipe, and bevel in the direction (
6
).
2
2
1
3
4
4
6
5
