SM-WC-
LR Li’l Runner (HS)
Li’l Runner (HS) Operator’s Manual
30
5.9. Guide adjustment tool
Allows the guide to be put parallel to an outside edge or a groove.
Attach the magnets to the guide, and put the guide on the workpiece along the direc-
tion of welding. Loosen the levers and put the tool onto the first magnet, resting the
side of the pilot pin on an outside edge or placing the tip of the pilot pin in a groove.
Then, lock the levers in this position and pull the further part of the guide off the
workpiece (
1
). Next, start moving the tool along the guide (
2
) to clamp the successive
magnets to the workpiece.
Part number:
UST-0466-53-00-00-0
1
2
Summary of Contents for Li'l Runner
