03
04
Functions
1. Arming
When ignition is turned to off, press button to
arm the system.
2. Mute arming
Press button twice (or
button once) to enter
muet arming mode.
3. Shock impact alarm
In arming mode, the first shock impact will trigger
the system warning, the siren will chirp with turn
signals flashing 3 times, and the engine will be
immobilized. The 2-way transmitter will beep 5
times with vibration, the icon and
icon will
be flashing with backlight.
If the second shock impact triggered in 15 seconds,
the siren will chirp 15 seconds with turn signals
flashing and the engine will be immobilized. The
2-awy transmitter will beep and vibrate, the icon
and
icon will be flashing with backlight.
In mute arming mode, the siren will not chirp.
4. Emergency alarm
In arming mode, if the key is turned to ACC ON
position, the siren will chirp sharply, the turn signals
will flash and the engine will be immobilized. press
button to stop alarming.
5. Disarming and rearming
In arming mode, press button to disarm the
system. If the motorcycle is not touched or the
enging is not started in 30 seconds, the system
will automatically return to the former arming mode.
Press button twice, the turn signals will flash
twice and the system will be disarmed completely.
6. Locating
Press button once or press and hold / + / +
buttons to locate motorcycle, the siren will chirp
for 10 seconds with turn signals flashing.
7. Anti-hijack
Ignition on, press and hold
or
button, the
siren will chirp sharply with the turn signals flashing.
The engine will be immobilized after 10 seconds.
Press button to stop this function.
8. Not-armed warning
When the ignition off and the system is not armed
within 10 seconds, the siren will chirp 3 times with
turn signals flashing to remind to arm the system.
9. Remote stop engine
During driving or starting engine, press button
once to stop the engine.
10. Remote engine start (986 series only)
Press
button twice continuously, the engine
will be started and run for 8 minutes, then engine
will be shut down and the system sill return to the
previous status. During the 8 minutes, if you insert
the key and turn to ACC ON, the engine will keep
running.
11. keyless driving (986 series only)
If the engine is started, press
button again in
8 minutes the siren will beep once to confirm that
the motorcycle can be driven with keyless.
When the engine is running, press button once,
the engine will be stopped.
12. LED indicator
In arming mode, the LED indicator will flash once
every two seconds. When shock sensor is
triggered, the LED indicator will flash continuously.
13. Special music reminding
Press any button on the transmitter, if it sends out
special music, the transmitter is communicating
with ECU, please operate it later.
14. Time setting
Press + button together for 2 seconds, the
transmitter beeps once, the figure will flash, the
press button to choose hour or minute setting,
and set the time by button.
Parameter setting:
1 Time: setting hour, minute (time in 24 hour
notation)
2 Exit: press + button together to save the setting
and exit the setting mode, the transmitter beeps
once.
15. Antenna range indication
Antenna range shows by bar on the LCD screen,
the more the bar, the stronger the signal. When
the transmitter can not receive the signal fron the
system, the signal bar will disappear.
16. Sensitivity adjustment by transmitter
In disarming mode, press and hold +
buttons
or
button to enter the shock sensor sensitivity
setting function. Press
button or
button to
change the 1~8 sensitivity levels (level 8 is the
highest sensitivity levels (level 8 is the highest
sensitivity level and level 1 is the lowest sensitivity
level).
When selecting sensitivity levels, the siren beeps
once with turn signals flashing once to indicate
the sensitivity is at level "1", the LCD transmitter
will monitor "1", the siren beeps twice with turn
signals flashing twice to indicate the sensitivity is
at level 2, the LCD transmitter will monitor "2", and
so on. Once the suitable sensitivity is set, press
button to confirm and exit the setting mode. (If
there is no adjustment within 15 seconds after the
system enters the sensitivity setting mode, the
system will automatically exit setting & revert to
its former sensitivity status, Factory default: level
5)
17. Backup battery (optional)
A backup battery provides power to the system
when the primary source of power is unavailable.
18. Monitoring the battery status of the
motorcycle
Every time when press armed button on the LCD
transmitter, the battery voltage of the motorcycle
will be shown on the transmitter with V icon flashing.
You can know the motorcycle's battery status at
any time.
