Steelmate 838M User Manual Download Page 5

6

7

PIN code mode on

Turn key to ACC on, press   button for 5 seconds, the 
siren will chirp twice, this confirms the PIN code mode 
is turned on.

Forget the PIN code 

If you forget your PIN code, please try to program the 
transmitters or contact the dealer.

1. Alarm arming & locking the doors

Press   button once on the transmitter, the doors will be 
locked with a short chirp and turn signals flash once. 
The LED light flashes to indicate that the system is armed 
in alarm arming mode.

2. Mute arming & locking the doors

Press 

 button once on the transmitter, the doors will 

be locked with turn signals flashing once and the siren 
will not chirp. The LED light flashes slowly, the system 
is armed in mute arming mode.

3. Impacting shock sensor
This system is 2-stage warning system:

In alarm arming mode, the slight impact will trigger the 
1-stage warning of the system, the siren will beep "Bee" 
3 times with turn signals flashing

 

3 times; the heavy 

impact will trigger the 2-stage warning of the system, the 
siren will chirp sharply with turn signals flashing for 30 
seconds, the engine will be immobilized.

In mute arming mode, the slight impact will trigger the 
1-stage warning of the system, the siren will not chirp 
and the turn signals will flash

 

3 times; the heavy impact 

will trigger the 2-stage warning of the system, the siren 
will not chirp and the turn signals will flash for 30 seconds, 
the engine will be immobilized.

Functions

4. Impacting microwave sensor

When microwave mode ON, press 

 button to enter 

microwave mode. When the microwave sensor detects 
continuous movements for 16 seconds around the car, 
the 1-stage warning system will be triggered, the engine 
will be immobilized, and the siren will beep "Bee" 3 times.

When the microwave sensor detects continuous 
movements for 28 seconds around the car, the 2-stage 
warning system will be triggered, the siren will beep "Bee" 
5 times with turn signals flashing for 5 seconds, the engine 
will be immobilized.

When the microwave sensor detects continuous 
movements for 40 seconds around the car, the 3-stage 
warning system will be triggered,  the siren will chirp 
sharply with turn signals flashing for 30 seconds, and the 
engine will be immobilized.

Microwave mode ON/OFF:

Press and hold   button for 5 seconds, turn signals will 
turn on and the system will enter the microwave selection 
mode. Press 

 button to switch ON or OFF microwave 

mode. 
When turn signals blink twice with the siren chirp two 
times, microwave mode is ON. 
When turn signals blink twice without siren chirping, 
microwave mode is OFF. 
The system will automatically confirm and exit 10 seconds 
later if no key-in operation was being conducted.

*

Factory setting is microwave mode ON.

5. Ignition, opening door/trunk/hood, pressing 
footbrake alarm

When the system is triggered by doors opened, ACC ON, 
trunk released or footbrake pressed in alarm arming mode 
or in mute arming mode, the siren will chirp for 30 seconds 
with turn signals flashing continuously, the engine will be 
immobilized.

Summary of Contents for 838M










Reviews: