-12-
ST1008 Mini Wood Lathe
SETUP
The following is a description of the main components
shipped with the STEELEX™ Model
ST1008. Lay the
components out to inventory them.
Note:
Some parts and hardware may already be
installed on the machine. Check the machine when you
use this inventory list.
Box Inventory (Figure 6) Qty
A. Mini Wood Lathe (Not Shown) .............................. 1
B. Safety Glasses ............................................................... 1
C. Live Center .................................................................... 1
D. Spur Center ................................................................... 1
E. Faceplate 3" ................................................................... 1
F. Tool Rest ......................................................................... 1
G. Knock Out Bar .............................................................. 1
H. Tool Rest Lock Handles ............................................. 2
Inventory
Figure 6. Box inventory.
B
C
D
E
F
G
H
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
The Model ST1008 was carefully packed when it
left our warehouse. If you discover the machine is
damaged after you have signed for delivery,
please
immediately call Customer Service at (360) 734-3482
for advice.
Save the containers and all packing materials for pos-
sible inspection by the carrier or its agent.
Otherwise,
filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, you should inventory the
contents.
Unpacking
SUFFOCATION HAZARD!
Immediately discard all plas-
tic bags and packing materi-
als to eliminate choking/suf-
focation hazards for children
and animals.
UNPLUG-power cord before
you do any assembly or
adjustment tasks! Otherwise,
serious personal injury to
you or others may occur!.
