background image

8

Grills operated with LP (liquid propane) gas must be installed with an LP regulator Not supplied

with the unit and set to 11" water column pressure.

The gas valves used in the grills are preset at the factory for Natural Gas or Liquid Propane

operation. Please contact your dealer and use a licensed contractor or installer to convert your

grill to a different gas type.

The self-contained LP system barbeque grill is design certified to be used with a standard 20 lb,

12  1/4"  diameter,  18" high  cylinder  with  right  handed  connection  threads  and  this  is  the

maximum size LP tank to be used. The cylinder must be marked in accordance with the latest

U.S.  Department  of  Transportation  specifications  for  LP  gas  cylinders.  (DOT.  CFR49  or

National  Standards  Of  Canada  CAN/CSA-B359  Cylinders,  Spheres  and  Tubes  for  the

Transportation of Dangerous Goods) a Propane Tank with an ODP ) Overfill Prevention Device)

must be used at all times.

Natural Gas Requirements

Always check the Rating Plate to make sure the gas supply you are hooking up to is the gas

type the grill is manufactured for.

IMPORTANT: Never connect the grill to an unregulated gas supply.

The installation of this appliance must conform with local codes or in the absence of local codes,

to  the  national  fuel  gas  code,  ANSI  Z223.1a-1998.  Installation  in  Canada  must  be  in

accordance with the standard CAN/CGA-B149.2, Propane Installation Code.

A  licensed  contractor  or  local  gas  company  representative  must  perform  all  natural  gas

connections.

Ensure that the service supplying the grill is fitted with a shut off valve conveniently positioned

near the grill and giving ease of access.

The grill must be isolated from the gas supply piping system by closing its individual manual

shutoff  valve  during  any  pressure  testing  of  the  gas  supply  piping  system  at  test  pressures

equal to or less than 0.5 psi (3.5 kPa).

The grill and its individual shutoff valve must be disconnected from the gas supply piping system
during any pressure testing of that system at test pressure in excess of 0.5 psi (3.5 kPa).

Summary of Contents for STL-32N






























Reviews: