background image

3

Use clamps or other practical way to secure and support the workpiece
to a stable platform. Holding the work hand or against your body is
unstable and may lead to loss of control.

Do not force tool. Use the correct tool for your application. The correct
tool will do the job better and safer at the rate for which it is designed.

Do not use tool if switch does not turn it ON or OFF. Any tool that
cannot be controlled with the switch is dangerous and must be repaired.

Disconnect the plug from the power source before making any
adjustments, changing accessories, or storing the tool. Such preventive
safety measures reduce the risk of starting the tool accidentally.

Store idle tools out of reach of children and other untrained persons.
Tools are dangerous in the hands of untrained users.

Maintain tools with care. Keep cutting tools sharp and clean. Properly
mantained tools, with sharp cutting edges are less likely to bind and are
easier to control.

Check for misalignment or binding of moving parts, breakage of parts,
and any other condition that may affect the tools operation. If damaged,
have the tool serviced before using. Many accidents are caused by
poorly maintained tools.

Use only accessories that are recommended by the manufacturer for
your model. Accessories that may be suitable for one tool, may become
hazardous when used on another tool.

Service

Tool service must be performed only by qualified repair personnel.
Service or maintenance performed by unqualified personnel could
result in a risk of injury. 

Summary of Contents for SP-PT221









Reviews: