STEELE PRODUCTS 2200 PSI, Owner'S Manual

Page: 10 / 22

Owner’s Manual
2
Operation
10
OPERATING INSTRUCTIONS
Start-up Procedure
1. Make sure water supply is connected and turned on.
2. Release gun safety if locked.
3. To allow air to escape from the hose, squeeze trigger on the gun until there is a steady flow of water
coming out from the nozzle.
Starting Engine
1. Check oil and gas.
2. Connect hose and turn on water.
3. Squeeze trigger.
4. Make sure the pressure washer is on the ON position (illustration 1).
5. Set the fuel valve to open (illustration 2).
6. Set choke if available (illustration 3) & set throttle to slow (illustration 4).
7. When starting engine, pull cord slowly until resistence is felt, then pull rapidly.
8. If engines starts and fails to continue running or if increase resistance is felt during starting pull attemps
repeat step 3 - 7.
4) Throttle Control
1) ON/OFF Switch
2) Fuel Valve
Choke Lever
Close
Open
TM
Choke Lever
Close
Open
TM
Choke Lever
Close
Open
TM
3) Choke
OFF
ON