manualshive.com logo in svg

Steelcraft VIRTU, Manual

Share
Download
Steelcraft VIRTU Manual Download Page 26

britax.com.au

26

BABY CAPSULE OPERATION

ATTACHING THE BRITAX UNITY BABY CAPSULE

PLEASE NOTE: THESE INSTRUCTIONS ARE FOR INSTALLING AND REMOVING 
THE BABY CAPSULE ON THE STROLLER ONLY. FOR INSTALLING AND PROPER 
USE OF THE BABY CAPSULE IN THE CAR, PLEASE FOLLOW THE INSTRUCTIONS 
MANUAL PROVIDED WITH THE BABY CAPSULE.
ENSURE THE BABY IS SECURED IN THE BABY CAPSULE WITH THE HARNESS 
AT ALL TIMES. REFER TO THE BABY CAPSULE INSTRUCTION MANUAL RE-
GARDING PLACING AND SECURING YOUR BABY IN THE BABY CAPSULE.

A

 Engage the stroller brake. 

Align the 

Unity Baby capsule with the Click 
N Go receivers. The Baby Capsule 
must be facing handle.

A

B 

Press firmly down on the Click 

N Go receivers until you hear a 
‘click’. Pull up the Baby Capsule 
to ensure they are locked into the 
stroller frame.

    

A

 Before remove the Baby Capsule, lock the 

stroller brake first.

    Squeeze both release levers on the Click 

N Go connectors at the same time and 
support the weight of the baby capsule. 
Lift and remove the baby capsule from the 
stroller frame.

CAUTION

B

A

REMOVING THE BRITAX UNITY BABY CAPSULE

CAUTION

Summary of Contents for VIRTU

































Reviews:

No comments

Brands by name

Popular brands

Load more brands