12
21
PLEASE NOTE: THERE ARE THREE FOOT TOY PAD POSITIONS.
THE FOOT TOY PAD MUST BE FITTED WITH THE CURVED EDGE
FACING OUTWARD AS SHOWN IN THE DIAGRAM.
A. FRONT - BENEATH THE UPPER TRAY
B. CENTRE - UNDER SEAT
C. REAR - BEHIND SEAT
A
Connect the foot toy pad to the base of the walker by inserting
the pegs on the underside of the foot toy pad into the holes along
the inside edge of the base then twist the peg in the direction
shown to lock into place.
NOTES
03. TO INSTALL THE FOOT TOY PAD
A
B
B
C
C
PLEASE NOTE: POSITION C CANNOT BE USED WHEN THE WALKER
IS IN THE PUSH MODE.
07. TO USE THE WALKER IN ‘STAND AND PUSH ALONG’ MODE (Cont)
B
Position and secure the foot toy pad at the front of the walker
(Position A) with curved edge facing towards the back of the
stroller, reverse the position of the push bar so it is now
located at the front of the walker and insert into the connectors
until the locking pins engage.
A
Position
