2. TO FIT AND REMOVE THE REAR WHEELS
NOTE: The axle has a flat surface and needs to be aligned correctly
into the wheel housing.
A Align the flat surface of the axle with the
flat surface of the wheel housing and
insert the wheel until it locks in. Pull on
the wheel to confirm it is locked in.
If not locked in , repeat the procedure.
Then repeat the rear wheel installation
for the other side.
B To remove the rear wheels , locate the
spring loaded lever ( on the underside of
the wheel housing. Pull the lever down
and at the same time remove the wheel.
Repeat for the other side.
9
