FORTIS REAR BUMPER
2014-19 TUNDRA
Page 4 of 8
6/6/19 (AL)
(Fig 6) Remove plastic cover
from the top of the bumper
Plastic Clip
Factory
Hardware
(Fig 7) Remove factory hardware
under the plastic pieces.
(Fig 8) Attach Driver/Left Support Bracket to frame
(Required on models without receiver hitch)
(2) Factory Bolts
(Fig 5) Remove Factory Hardware and Plastic
Clip from the underside of the bumper
Note:
The support brackets that
come with the kit install in the same
place factory support brackets would
be installed.
Rear
