background image

  CLICK & GO BASSINET  |  13

Care & Maintenance

General Maintenance & Repair

•  

Ensure all safety devices, locks, harness, and brakes are in 

working order.

•  

Ensure all joints and folding areas move freely as intended.

•  

Should any moving or locking parts become stiff or hard to 

operate, ensure these are free from tension, or dirt by wiping 

clean with a damp cloth to remove any dirt, sand, or debris. 

Allow to dry and lightly spray with a dry silicon lubricant. Please 

carefully read the lubricant instructions prior to use.

•  

Ensure wheels are regularly cleaned with a damp cloth by 

removing dirt, sand, or debris. Allow to dry and lightly spray 

the wheel pivot pin with a dry silicon lubricant to keep the 

wheels moving smoothly. Please carefully read the lubricant 

instructions prior to use.

•  

Regularly spray all moving parts with a dry silicon lubricant. 

Please carefully read the lubricant instructions prior to use.

•  

Ensure all connecting rivets and screws are secure. 

Tighten if required. 

•  

If there are compression marks on the tyres, use a domestic 

hair dryer to gently warm (DO NOT OVERHEAT) the tyre and the 

compression marks should slowly disappear.

•  

To maintain the safety and longevity of the stroller, seek prompt 

repairs or replacement for bent, torn, worn, or broken parts. Do 

not continue to use the stroller if unsafe. 

•  

All repairs should only be carried out by an authorised Britax/

Steelcraft repairer. Only Britax/Steelcraft replacement parts 

should be used with the stroller. It may be unsafe to use parts 

supplied from another manufacturer.

General Tips

Do not store the stroller in your car

 for prolonged periods of time 

during summer as it may lead to damage to some of the plastics 

components.

Do not leave the stroller in direct sunlight

 for extended periods 

of time, as colours of some fabrics may fade, and tyres may 

deteriorate.

Do not fold or store the stroller if damp or wet

, as fabric may 

develop mould or mildew. Always store the stroller inside in a dry, 

well-ventilated area.

Do not place heavy objects on top of the stroller

 as it may alter 

the shape.

Should you have any further questions on care & maintenance 

of the stroller, please contact our Consumer Service Team at: 

[email protected]

Care & Maintenance

Cleaning

Fabrics

•  

Removable fabrics may be cleaned using lukewarm water and 

soap or mild detergent. Rinse thoroughly and allow to dry away 

from direct sunlight. 

•  

Non-removable fabrics can be spot cleaned using a damp 

sponge and soap or mild detergent. Allow to dry completely 

before re-use or storage.

•  

Never use bleach, or abrasive cleaning products.

•  

DO NOT

 iron or dry clean.

NOTE:

  

DO NOT

 place any of the stroller fabrics in the dryer. Allow 

to dry naturally, away from direct sunlight.

Frame

•  

Remove dirt and dust away from any moving mechanism.

•  

Clean frame with a soft damp cloth and soap or mild detergent 

and allow to dry thoroughly.

•  

DO NOT

 use abrasive cleaning products as it may cause stains, 

discolouration or scratches to the frame.

•  

DO NOT

 soak or submerge frame in water. 

•  

DO NOT

 remove, dismantle or alter any part of the stroller 

mechanism or brakes.

Leatherette

•  

Spot clean with a damp soft cloth. 

•  

DO NOT

 use a dripping wet cloth or wet the 

leatherette excessively.

Wheels

•  

Remove wheels from stroller.

•  

Clean with damp cloth and soap or mild detergent. Use brush 

to remove dirt and mud build up around the tyre. Allow to dry 

thoroughly before placing wheels back on the frame.

•  

If necessary lubricate wheel shaft with a small amount of 

lubricant before placing into the stroller.

•  

Ensure the stroller is cleaned thoroughly after using it on the 

beach as sand and salt can damage stroller mechanism, wheel 

assembly, causing premature wear and corrosion.

PLEASE NOTE:

  

Our product warranty does not cover any rust to the rivets or 

screws, if you are caught in the rain or at the beach always 

thoroughly dry the frame to avoid any rust damage.

Summary of Contents for click & go





















Reviews: