PLEASE NOTE: This stroller has been designed with independent
suspension to give your child a more comfortable ride, this means
that each corner of the product can rise and fall individually. Under
some circumstances one wheel may lift from the ground when the
suspension is operating, particularly when changing direction
quickly, THIS IS NOT A PRODUCT FAULT, it is merely an operating
characteristic of the stroller which should not cause any problems.
The handle on these strollers is reversible so that you can push the
stroller either facing the child, or from behind the child. When
making adjustments to the handle position, you must also adjust the
position of the wheels.
To ensure the wheels are correctly positioned in accordance with the
handle position, please do the following:-
1. Adjust the handle to the desired position.
2. Release the swivel locks on all wheels.
3. Push the stroller forward approximately one metre.
4. Now apply the swivel lock on any wheels that are not required to
swivel.
PLEASE NOTE: There are four sets of swivel wheels on this stroller,
however only use 2 sets in the unlocked swivel position.
The wheels closest to your feet/handle should always be in the
locked position with the brake lever facing you.
When pulling the stroller backwards all swivel wheels must be
unlocked.
5. Your stroller wheels are now configured correctly for use.
This procedure must be followed each time you adjust the handle until
you become familiar with the correct wheel position before locking the
swivel locks.
10
OPERATING THE STROLLER
USING THE SWIVEL WHEELS
Summary of Contents for Accent H318 Series
Page 38: ...38 NOTES...
