Removal of Plastic Lock Plug and
Installation of Lock Cylinder
1.
Pull open plastic plug cover.
2.
While pressing the plug retainer tab to the right,
insert a coin or the head of a key into the slot and
turn 90
o
clockwise. This will unlock the case. You will
hear the lock mechanism open.
3.
Push plug retainer tab down and remove plastic
plug from parent unit.
4.
Position lock cylinder tab at 45
o
or 2:00 position.
Insert lock cylinder at a tilted angle so the tab will
collapse.
5.
Push lock cylinder into the hole until it stops and
turn the lock plug assembly clockwise 45
o
(or the
3:00 position) and remove the key.
CAUTION: Make sure you unlock the
case BEFORE proceeding to step 3.
TAB
45
o
or 2:00
CL
PLASTIC PLUG
COVER
COIN OR
HEAD OF KEY
PLASTIC PLUG
PLUG RETAINER TAB
CAUTION: Make sure the tab is
located at 45
o
or 2:00 before
inserting lock cylinder.
CAUTION: Failure to follow the installation
instructions will cause inability to install lock.
TURN 90o
3:00
45
o
PLUG RETAINER TAB
1
2
3
4
5
Page 17 of 57
P/N 939504734
Doc # 70305 Rev J
