Page 5 of 14
939500174 Rev B
T-Junction
Style No. C120TJ
1.
Once the transom structure and
skin assembly is complete, measure
the distance from the floor to the
ceiling track.
2.
Cut the T-trim 7/8" longer than the
dimension found in step 1.
3.
Snap the L-trim on to the trim
holders, putting the cut end inside the
ceiling track.
Note:
The transom trim holder can be
mounted above or below the factory-
provided location by using the junction
bracket as a template and drilling two
(2) 9/64" diameter pilot holes.
Tip:
Position the transom trim holder
with item 15 to the best support the
trim.
11
1
1
2
1
1
1
2
1
4
3
3
3
1.
7/8"
84"
66"
