Style No. C78CVSJ
1.
Once the transom
structure and skin assembly is
complete, measure the
distance from the frame top to
the ceiling track.
2.
Cut the V-trim 7/8" longer
than the dimension found in
step 1.
3.
Measure the distance
from the frame top to the top
of the trim holder above.
4.
Secure the aligner bracket
from the bottom uncut end of
the V-trim 1/16" greater than
the dimension found in step 3.
5.
Snap the V-trim on to
the trim holders, putting the
cut end inside the ceiling
track.
Note:
The transom trim
holder can be mounted
above or below the factory-
provided location by using
the junction bracket as a
template and drilling two (2)
9/64" diameter pilot holes.
Tip:
Position the transom
trim holder with item 15 to
the best support the trim.
V-Junction trim
Change of Height Trim
1.
3.
7/8"
1/16"
84"
66"
1
1
1
5
6
6
6
21 17
7
1
5
12
Page 13 of 14
939500174 Rev B
