Page 4 of 4
003876D Rev T
®
FYI Single Monitor
Arm with Frame
One Bracket
FPASINGLEFO
SET SCREW
T-HANDLE
1
8
7
10
Attach VESA Bracket to backside of monitor.
Slide monitor mount assembly onto end of arm until audible
"click" is heard. Tighten set screw to prevent removal of
monitor.
Gently pry off cable cover on the bottom of the arm. Insert
cables into arm cavity and through two loops under
the arm. Press cover back into place.
Adjust T-handle to accommodate weight
of monitor. The monitor should "float"
(neither rise nor fall) when the
counterbalance is properly
adjusted.
DFPADUALCS
FYI Dual Flat Panel
Monitor Arm with
c:scape Bracket
Slatwall/SlatRail
Bracket
FPASWR
Wall Mount
Bracket
FPAWALL
Through Mount
Bracket
Desk Clamp /
Grommet
Bracket
(Service Part)
(Service Part)
7
8
10
insert cables
cable cover
9
9
DFPASINGLECS
FYI Single Flat Panel
Monitor Arm with
c:scape Bracket
RELEASE
MECHANISM
sinks
when installed, pull up the
T-handle and turn
clockwise
until monitor
“floats”
.
rises
when installed, pull up the
T-handle and turn
counter-clockwise
until
monitor
“floats”
.
IMPORTANT:
Adjust the upper arm 20° above horizontal, to allow the
T-handle to turn easily. The T-handle will bind and could
break, if the upper arm is not in this position.
IMPORTANT - Adjustment Information