Steelcase FrameOne Plus, User Manual

Page: 26 / 29

Maintenance
FrameOne Plus Manual -en- 2017 Page 26 of 29
Maintenance work
Only authorised specialist personnel may carry out maintenance work. Please contact our Customer Service
Department for assistance (see
Repairs and spare parts on Page 29).
Before adjusting the height of the desk, make sure that the desktop is horizontal. If the floor is uneven, align
the desktop with the adjusting screws on the feet.
WARNING
Danger of injury and damage!
When lifting on the desktop or attached components, the fastening screws
may tear.

Transport or move the desk only by grabbing the base frame.
NOTICE
Damage to the desktop is possible!
After disassembling the desk, for example for transport reasons:

Reassemble the two side frames only with the appropriate desktop cross-
member of the same desk.

Follow the separate assembly instructions.
NOTICE
Using unapproved spare parts may cause damage to the desk.

Only components provided by Steelcase may be used as spare parts.
Coordinate the installation of other parts with Steelcase.

Observe the specified maintenance and inspection intervals.
Disclaimer of liability
Steelcase assumes no liability or warranty in the following cases (see Liability on Page 2).

Inadequate monitoring of the product components (function checks).

Improper maintenance.

Maintenance through a third party.

Maintenance by unqualified and unauthorised personnel.

Use of components and adaptations that do not originate from Steelcase.

Unauthorised modifications of the product in its construction and design.

Intentional misuse.

Improper use.