Operation and settings
FrameOne Plus Manual -en- 2017
Page 18 of 29
Height adjustment
Height adjustment is only possible on variants
Telescope
. Height adjustment of the
FrameOne Plus Type
10 Standard, Type 10 EcoPack and Type 16
desks is done in the same way. Type 10 Standard, variant
Telescope was used for the illustration.
Type 10 Standard
Loop
The desk has a fixed height of 740 mm. The desk height is not adjustable.
Variant
Telescope
The desk can be adjusted continuously to a height between 640 and 920 mm.
Fig. 7 Type 10 Standard, variant Telescope: Adjusting the desk height
1
Fastening screw
2
Allen key
3
Scale
4
Adjusting screw for height compensation
Procedure:
Remove all objects from the desk.
Loosen the fastening screw (1) with an Allen key (2).
Pull up or slide down the telescopic column to the desired length; see scale (3).
Hold the desk top while doing so!
Do not stay under the desk while adjusting the height!
Tighten the fastening screw (1) to a maximum of 3.5 Nm.
Set all columns to the same height
If necessary, adjust the height with the adjusting screw (4) afterwards.
