Page 2 of 3
939501454 Rev A
1a.
1b.
HANGER BRACKET
LH SHOWN - RH TYPICAL
BOX HALF ASSEMBLY
ELECTIVE
ELEMENTS
BRACKET
(NON HANDED)
PANEL ASSEMBLY
SERIES 9000
VALENCIA
AVENIR
ELECTIVE
ELEMENTS
BLUNT NOSE SELF TAPPING SCREWS
DOUBLE FACED TAPE
WORKSURFACE
Cable connect box assembled onto
structural panels
1a.
Select the proper style bracket, either a right
or left hand hanger bracket for Series 9000,
Valencia and Movable Walls panels or the (non-
handed) Elective Elements hanger bracket.
Secure bracket to the back side of box half with (2) self
tapping screws. Hook assembly onto panel
assembly. Proceed to Step 2.
Cable connect box assembled onto the
top of a desk or worksurface
1b.
Secure rear cover plate to box half assembly
with (2) screws. Remove protective paper form
one side of double faced tape and apply onto side
of box half assembly. Remove remaining
protective paper from tape and adhere box half
assembly onto a desk or worksurface in desired
location. Proceed to Step 2.
REAR
COVER
PLATE
8-32 X 3/8” BLUNT NOSE
SELF TAPPING SCREW
