Steelcase ap40 Quick Start Manual Download Page 5

Page: 5 / 8

Page 5 of 8

939500519 Rev B

Cantilever Identification

NO IDENTIFICATION HERE:
Cantilever to be used on
Pathways Technology Wall,
Answer and kick panels.

"AV" IDENTIFICATION HERE:
Cantilever to be used on
Avenir panels.

"9" IDENTIFICATION HERE:
Cantilever to be used on
Series 9000 and ap40 panels.

Using the proper cantilever
will put the worksurface at
the same height as the older
cantilever versions.

Mounting Bracket Identification

Use on:
• Series 9000
• Avenir
• ap40

NOTE:
Use of improper mounting plate can result in
worksurface edge damage.

3 SLOTS

Use on:
• Pathways Technology Wall
• Answer
• kick

4 SLOTS

Summary of Contents for ap40

Page 2: ...Page 2 of 8 939500519 Rev B Cable Management Gaps NO GAP NO GAP NO GAP NO GAP NO GAP NO GAP NO GAP ...

Page 4: ...Page 4 of 8 939500519 Rev B Typical Panel Mounted Applications ...

Page 6: ... Tap into position with a mallet 1b NOTE The tab shown in the close up 1c provides 1 2 spacing on the panels Remove this tab when used on ap40 panels 2 Tip mounting plate and insert tab through the cantilever for left right or shared conditions 3 Check to make sure the cantilever is fully engaged at the locations shown as a and b 1a 1c 2 3 b a 1b TAB ...

Page 7: ...e 4a and attach using four 4 10 10 x 1 pan head screws for left hand or right hand cantilevers and seven 7 10 10 x 1 pan head screws for the shared cantilever 4b 5 Attach the tie strap using four 4 8 11 x 7 8 flat head screws 4a 4a 4a 4b 5 4b 4b TIE STRAP FOUR 4 FLAT HEAD SCREWS ...